![]() The pump also has a separate power supply so as not to run your batteries down in the GX-3R monitor. The RP-3R clip-on sampling pump only roughly doubles the size of the monitor once it is attached and will allow up to a 100’ sampling range with attached tubing. The SDM-3R calibration station allows you to charge, calibrate, bump test and alarm test your unit right in the field. Popular accessories for this item are the SDM-3R calibration station and the RP-3R sampling pump. RKI also warranties these units with a 3 year manufacturer’s warranty. The RKI GX-3R also has audible, visual and vibration alarms to make sure you are notified of danger no matter your environment. ![]() Alarm levels can also be adjusted to 3 different loudness settings. It has a very simple two button operation and the buttons are large so there is no issue pressing them with work gloves on. The 30 second interval is adjustable.īattery life can go all day in the field with up to 25 hours of operation (with the Lithium-ion battery). The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The instrument flashes it’s 3 LED lights every 30 seconds in the following conditions if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. Safety supervisors will appreciate the non-compliance indicator. Now there is a 4-gas monitor smaller than many single gas monitors Traditionally this means only a single gas monitor would be small enough for a worker to practically wear a gas monitor ‘In the breathing zone’. ![]() Air sampling filters may be attached to the collar or lapel. OSHA defines the breathing zone as a ten-inch radius around the worker’s nose and mouth, and requires that worker exposure monitoring air samples be collected in the breathing zone. The unit is also dust and water resistant and carries an IP66/68 rating. It simultaneously monitors and displays LEL combustibles, O2, CO (Hydrogen compensated CO also available), and H2S. The GX-3R is the world’s smallest 4 gas monitor weighing only 3.52 ounces and can comfortably be clipped within a worker’s breathing zone (2.2” W x 2.55” H x 1.02” D). We now rent the smallest and lightest 4 gas monitor that is on the market! The GX-3R, manufactured by RKI Instruments, has revolutionized the clip-on gas monitor industry with their newest offering.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |